No matter how advanced your Netgear wireless range extender is, it is obvious to experience a technical issue with it. Sometimes, it’s a slow WiFi connection which causes issues and sometimes, you could change a setting which is very important. As a result, the extender doesn’t work in the way it should. However, several troubleshooting experts may tell you to reboot your extender for fixing all these problems.
Rebooting is so common that the customers do it without giving it any second thought. Yet, it is not a valid and good fix if you do it on and on. Constant reboots can put an adverse effect on the device’s performance, causing it to slow down and more technical glitches than earlier. Luckily, there are various ways to save your extender from constant reboots. Let’s get to know which are these:
Keep the Device Cool
One of the essential reasons that why your WiFi extender is under-performing is that it gets overheated. Once you are done with Netgear extender setup, it is continuously in the active state throughout the day and even in the night.
The outcome of this is an overheated extender and at last, slowing down performance. If the extender’s temperature is more than 115 degrees, it means it is too much hot.
The straightforward solution to this is just switch off the device and unplug it. Wait for some time and let the extender cool down.
Keep the Device Neat and Clean
Dirt can affect your extender very badly because it can fill in via the openings and jam the mechanical parts. Therefore, it is always suggested to keep your WiFi booster neat and clean. Don’t use any chemical or water to clean the extender. However, you can use a soft brush and a piece of cloth for the same.
Dirt can affect your extender very badly because it can fill in via the openings and jam the mechanical parts. Therefore, it is always suggested to keep your WiFi booster neat and clean. Don’t use any chemical or water to clean the extender. However, you can use a soft brush and a piece of cloth for the same.
Check the Power Connectors
Be sure to regularly check if the power received by your extender is proper or not. An inappropriate power supply can cause a lot of issues to the extender. Maybe you are not able to access its default mywifiext.net login portal or perhaps the extender can’t connect to the network.
To resolve this issue, you just need to turn off the AC plug and then the WiFi repeater. Now, wait for 2-3 minutes and turn them both on again. Check the lights on your extender – they must remain constant. Another solution is to find an electrical outlet having an adequate power supply.
Utilizing a USB Fan
Buying a USB fan can help you a great deal in disposing of the overheating issue with your Netgear wireless extender. It can be said as the most cost-effective way to remove several technical problems.
Just connect the USB fan to your WiFi extender. Your system will remain cool while all the hot air will be thrown out. Once done, access mywifiext.net and connect your smart WiFi devices to it.
Use the Updated Firmware Only
Installing the latest firmware updates introduces new and more useful functions, fixes the current bugs as well as improves the performance and security of your extender. Talking about Netgear WiFi extenders, users can update their firmware through Netgear genie setup.
Whenever there is new firmware version available, you will get a notification message at the top bar of the extender’s dashboard. Just click on that message and update the firmware.
When does Your Netgear WiFi Range Extender Actually Require a Reboot?
An overloaded wireless extender is the most common scenario when rebooting is the ultimate way to get the things fixed. Overloading means more use over time. Thus, the extender gathers such a great amount on its memory that it begins working abnormally. Everything considered, restarting unburdens the device so that it can convey the WiFi signals appropriately to blind spots.
