Have you recently purchased a Linksys Extender? If yes, then you need to first configure the extender with your existing router for enjoying seamless internet connectivity to stream, play online games, or for web browsing. Don’t know how to perform a Linksys extender setup Well, we have the solution!
This write-up wraps step-by-step instructions to help you configure your Linksys extender in a matter of minutes. Before we dig deeper and indulge in the configuration process, it is important to explain the use of Linksys extender. The WiFi device helps in extending the internet signals of a current network. There can be many areas in your house that can not be covered by your existing router. To cover such dead zones, you need Linksys extender in order to experience the best WiFi network throughout your house. Moving on, let’s now have a nudge on the Linksys range extender setup process.
There are various methods to configure a Linksys Extender. Let’s make you familiar with all.
How to set up Linksys Extender Using Manual Method
- Unbox your Linksys range extender and install the antennas available (if any!).
- Now, power up your device.
- Once done, connect the device to your existing router either using an Ethernet cable.
Note: Make sure the Ethernet cable is not dusty or damaged.
- Get access to your computer and launch your preferred web browser. (I Selected Chrome:)
- Enter extender Linksys in the web address bar of your web browser.
Note: No matter which web browser you are using, what matters is to use the updated version of the web browser to avoid any issues while accessing the default web address for Linksys extender login.
- As soon as you hit Enter, you will be taken to the Linksys extender login page.
- Once there, you need to enter the default credentials.
Important: If you don’t know the default password, you can approach a tech support expert for quick and immediate help.
- After entering the default password, hit the Log In button.
- Once done, you will be prompted to select the network you want to extend from the available ones.
- Choose the right one and proceed further by hitting Continue.
- Follow the on-screen prompts and complete the Linksys Extender setup process.
That’s it! This is how you can configure your Linksys extender using the manual method.
Besides, you can also configure your Linksys WiFi range extender using the WPS button. Here’s how to do it.
How to Configure Linksys Extender using WPS Button
This is the easiest method for configuring a Linksys WiFi extender. For this, all you need to do is:
- Plug in your Linksys extender to a working power outlet, power it up and make sure it is receiving adequate power supply.
- Locate the Linksys WPS button on your extender and press it.
- Next, locate the WPS button on your WiFi router and press it.
You are done with the Linksys extender setup using the WPS button. Your WiFi extender is all set to use.
After successfully configuring your extender Linksys, you can tweak its settings the way that suits you best. In case anything goes wrong, drop us a line in the comments section.
Bonus Tips
If you don’t want to face any trouble while configuring your range extender, then you need to have a tab on various points. Here they are:
- You are advised to place your Linksys extender far from the electric devices, metal appliances, reflection of glass or mirrors, automatic garage openers, Bluetooth speakers, fish tanks, baby monitors, aluminum studs, and then some.
- While accessing the login page of Linksys extender, avoid using extra tabs in your web browser.
- At the time of Linksys extender setup, place the device closer to your router and in an open area so that it can receive WiFi signals without any issues.
- Make sure all the wired connections of your devices are proper and finger-tight.
To Sum Up
We hope that now you are all familiar with the configuration process of Linksys WiFi range extender. What are you waiting for? Just set up your extender Linksys and start surfing, streaming, or gaming from just about anywhere in your home.
