A whole house filter is a type of filter that is connected to the main supply so that the water that enters your house is already treated. Unlike point-of-use filters, which are installed to filter water from the house, point-of-entry filters let your water dispensers – kitchen, laundry, bathtubs, showers and toilets dispense filtered water. Water filtration is an easy process that ensures water flowing has great taste and is purified. At Schultz Soft Water, our professionals know that the type of filter that you purchase can impact the quality and the amount of water that can flow in your house. As a rule, you need to consider the credibility and the reputation of the company or the vendor that you want to deliver the filters. Here are the top 5 tips on choosing the best whole house water filters for your home.
1 – Decide on the Type of Whole House Filter
Choosing the type of filter to be installed depends on the type of contaminants in your water. You need to talk to a professional to determine which contaminants you need to remove from the water flowing into your home. If your main water line is maintained by a municipal service, you may need to remove sediments, chlorine, minerals and chemicals.
If you are considering connecting your home with a private water well, you will need to remove contaminants such as hardness minerals, iron and sediment. However, the amount of contaminants in the water may vary in from mild to toxic. We at Schultz Soft Water understand that correct selection of the filter is important in ensuring that only completely filtered water flows in your dispensers. Our professionals can help with analyzing your water to help make the right decision.
2 – Know the Flow Rate of Your Dispensers and Appliances
The flow rate is measured in gallons/minute. The flow rate is the measure of the amount of water that can run through your house dispensers—dishwashers, showers, hot water heaters, and toilet. When planning to buy your filters, make sure to know the demand specifications provided by the manufacturer of your appliances and water dispensers in your home. For example, a typical showerhead has a flow rate of 2.5-5 gallons per minute while dishwashers and toilets have flow rates of 5 gpm and 3 gpm respectively. Depending on the size of your family, the number of water dispensers, and the flow rate of each dispenser, a professional can help you calculate the right flow rate that your filter should have.
A whole house well water filter system with a flow rate lower than the required rate would mean interrupted water flow, and low water pressure, especially during peak use.
3 – Consider the Size of the Filter You Want for Your Home
A large filter is the best, as it means increased water supply and longer service interval. You also need to check the port size of the filter since it impacts the gallons per minute and the pressure of water that flows into your house. For an average home, the ideal size of a whole house filter should be 4.5″x 20″. On the other hand, large households may need to install filters with a flow rate of 25gpm and 1 1/2 -inch ports.
4 – Ask About the Life of Your Whole House Well Water Filter System
The life of the filter will vary based on the state of water you plan to filter. The quantity and the quality of the sediment in water should be considered when buying a whole house well water filter system. The life of the filter is determined by the amount of water that it can filter before being replaced. If water pressure is reduced, you most likely waited too long before filter changes. We recommend maintaining records of filter changes so you can get on a routine schedule.
5 – Ensure to Find NSF-Certified Filter System
When all other factors have been considered, the most important thing that you want to know is if the filter system is NSF certified. No matter the size of the filters you are buying, it is prudent to ensure it is certified. You can check the seal, which is a sign that the filter system has been tested and approved by the authorities.
If you have decided to replace your old filter systems or replace them with a modern one, these tips will help you select the best whole house well filter systems. They are not only compliant to the state safety and protection rules, but also efficient to solve all your water filtration needs. Our professionals at Schultz Soft Water will help determine the water quality by analyzing the contaminants that need to be removed.
