Netgear AC1900 smart WiFi router delivers combined WiFi connection providing speed up to 1300 Mbps. Having dual-core 1 GHz processor, the AC1900 router is perfect for bandwidth-hogging apps such as live video streaming and playing online games.
If you have recently spent money on a brand new Netgear Nighthawk AC
1900 router and you are too new to it, let’s tell you there is a need to connect it to the internet for making it up and running. For not-so-tech-savvy freaks, here is a step-by-step guide to connecting your router to the internet for the Netgear Nighthawk AC 1900 setup. Let’s get things started.
Connect Netgear AC 1900 to the Internet
Here are the steps to connect your Netgear AC1900 WiFi router to the internet:
- First and foremost, turn off your modem and disconnect all the attached wires to it.
- After some time, turn on your modem.
- Thereafter, plug in your AC1900 router to a power socket and turn it on.
- Let all the LEDs be stable.
- Now, on your device (PC, laptop or mobile), try accessing the internet.
In this manner, you can connect your Netgear Nighthawk AC1900 WiFi router to the internet with ease.
Fix: Common Issues While Connecting Your Netgear AC1900
Here is a list of common issues (along with their relevant fixes) you may face while connecting your AC1900 router to the internet:
- If your Netgear WiFi router is turned off, the internet won’t work well. So remember to power on your router after connecting it to the internet.
- In case your network cable is damaged or worn out, you might not be able to get a proper internet connection. To get rid of this issue, replace the damaged or old cable with the new one right away.
- On the off chance if you have plugged in your internet cable in the wrong port, then you would be unable to access the internet. So make sure that the cable is connected to the right port. Also, the cable connections must be finger-tight. Once done, try accessing Netgear genie setup wizard to check if the internet is working or not.
- Possibilities are that you might not be getting proper network from your Internet Service Provider (ISP). You can check your internet connection by using the ping command. Just open the command prompt and see whether your IP address is pinging or not. If it is pinging, it means your router is working properly.
How to Check if Netgear AC1900 is Connected to Internet?
By checking the following points, you can verify if your router is connected to internet:
Hardware Connections
- First of all, connect your Netgear Nighthawk AC1900 router to the existing modem via an Ethernet cable.
- Now, restart your modem.
- Turn on your Netgear AC1900 smart WiFi router.
- Make sure that all the LED lights on your router are solid green.
Device Connections
- Ensure that your device, be it a computer, laptop or mobile, is connected to the internet properly.
- There must be strong WiFi signals on your connected device.
- The device should not contain any type of infected files or folders.
- Run an antivirus scan on your device and try connecting to the internet again.
What If Internet Testing Fails?
Consider the below-given troubleshooting tips to fix the issue:
- Ensure to complete your Netgear Nighthawk setup properly.
- Connect your device to another WiFi network. If the internet is working properly on that device, it means that the problem is with your router. So factory reset your router and restore all its default factory settings.
Still having connection issues with your Netgear AC1900 smart WiFi router? Worry not! Just reach our experts via the comments below and get solutions in the least possible time.
